Impact Crusher,Impactor Crushers

Impact crusher can crush many kinds of materials with max feed size less than 500mm and crushing strength less than 360 MPa.  The crushed materials with cubic shapes are  ideal for highway construction, water conservancy project, architecture, etc.  Moreover, our impact crushers is optimized and widely applied in the first and secondary crushing.

Operating principle

Impact crusher crushes materials by impact force.  When materials enter the blow bar area, they are crushed due to the high-speed impact of blow bar and are thrown to the impact plates on the rotor for secondary crush.  Then the materials will be thrown back to the blow bar again for the third crush.  This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine.  The size and shape of the finished materials can be changed by adjusting the gap between the impact rack and rotor support.  The machine employs self-weigh security device in its back frame.  When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.

The single rotor impact crusher has the characteristics of simple structure, big reduction ratio, low energy consumption l,  high output , light  weight , cubic physique end product .  it can supply the uses of industry sectors such as dressing, chemistry, cement, building, fire-proof material, ceramics, glass to use in hitting garrulous and each kind of medium degree of hardness using of in broken bits material, for example: Limestone, chamotte, slag, coke, coal and so on.

Compare to hammer crusher,impact crusher has bigger reduction ratio and Can fully use the high speed impact energy of entire rotor . But because the impact crusher board hammer is extremely easy to wear, it also is restricted in the hard material stave application.impact crusher is usually used to break thick garrulous, garrulous or the limestone, the coal, the calcium carbide, the quartz, the dolomite, the curing iron ore, the gypsum and the industrial chemicals which are hard following brittle material.

The ideal entering material granularity  of this series is 100-500mm,the most greatly is not surpass the rating. The materail granularity user can ajusts the hammer head and the impact board and th gap between component,according to theirs demands.

Characteristics:

Hammer is made of high chrome; liner board is made of wearable materials;
Specially designed tooth impact plate;
More suitable for crushing hard rock, high efficiency, low consumption;
Final products is cubic, discharge opening is adjustable;
Make the crushing flow chart simple.

Technical Data:

Notice: Any change of Impact Crusher technical data shall not be advised additionally.

Impact Crusher

[PRINT]    [CLOSE]